Options      Specifications      Spindle Configurations

4 Side Moulder      GS-623

Very Inexpensive 6 Spindle Moulder

Inquire for Details

The newest in our line of Moulders, the GS Series now offers two top spindles.  It is ideally suited for architectural millwork and the flooring industry.

Convenient Spindle Adjustment

  • All controls for the spindles are located at the front of the machine for convenient adjustment.  Each spindle is provided with mechanical digital readout, giving accurate adjustment.

 

 

Side Front Pressure Plate on Left Vertical Spindle

  • Fully eliminates unsmooth problems when feeding short or narrow stock.  The pressure plate is easy to adjust.

 

Convenient In-Feed Adjustment

  • Two levers located at the right side in-feed. Unlocking and movement are in the same location.

Over Height Protection

  • The in-feed  is equipped with an overhead flap.  Which will stop the feed if the material is over sized.

 


Front Chip Breaker and Rear Pressure Plate

  • The front pressure plate devices  have a retracting feature, which fully avoids damage on cutters caused by an over-height work piece.  The rear pressure plate provides extremely uniform accuracy making it parallel to the table surface.

 

 

Feed Magazine

  • Provides constant feeding with no gaps particularly with short stock.  Thus increasing the rate of production and also is a good safety feature particularly on very short pieces.

 

 

Adjustable Short Stock Pressure Roller

  • The pressure roller for short stock can be raised quickly providing maximum convenience while changing the fence side cutterhead.

Universal Spindle(Optional)

  • This spindle can be tilted for complicated cutting jobs.

 

Specifications

Planing Width 10-230mm / 3/4-9"
Planing Thickness 7-125mm / 3/8-5"
Min. Working Length 230 mm
Feed Motor 5 HP
Feed System Elevation 1/3 HP
Spindle Diameter 40mm / 1 13/16"
Spindle RPM 6000 RPM
Feed Speed 6-25 M/Min
Front Bottom Spindle 100-150mm Cutter Diameter
Right/Left Vertical Spindle 100-200mm Cutter Diameter
Top Horizontal Spindle 100-200mm Cutter Diameter
Bottom Horizontal Spindle 100-200mm Cutter Diameter
Motor Horsepower  
Bottom Horizontal Spindle 10 HP
Right / Left Vertical Spindle 15 HP
Top Horizontal Spindle 10 HP
2nd Top Horizontal Spindle 10 HP
2nd Bottom Horizontal Spindle 10 HP
Feed Roll Diameter 140mm
Feed Roll width 2 X 50mm
Adjustment of Vertical Spindle 30mm
Adjustment of Horizontal Spindle 40mm
Table Adjustment 12mm
Table Length 2000mm
Min. Length of Cut 230mm
Driven Bed Rolls  

 

STANDARD FEATURES:

1)           CONVENIENT SPINDLE ADJUSTMENT

-          All adjustments are positioned for operator convenience

-          DIGITAL READOUTS ARE PROVIDED FOR A QUICK SET UP

2)           SIDE FRONT PRESSURE PLATE ON LEFT VERTICAL SPINDLE

-          FULLY ELIMINATES CHATTER PROBLEMS WHEN FEEDING SHORT OR NARROW STOCK.

-          THE PRESSURE PLATE IS EASY TO ADJUST.

3)           CONVENIENT INFEED ADJUSTMENT

-          INFEED TABLE AND FENCE ARE CONVENIENTLY ADJUSTED BY THE SEPARATE CONTROL LEVERS.

4)           OVER HEIGHT PROTECTION

-          IN CASE WORKPIECE EXCEEDS THE RATED MAXIMUM HEIGHT, IT WILL BE RESTRICTED BY THE OVER HEIGHT PROTECTION DEVICE/SWING ARM FEED PROVIDED AT THE WORKPIECE INFEED END.

5)           FRONT AND REAR PRESSURE PLATE

-          THE FRONT PRESSURE PLATE FEATURES DRAW BACK PERFORMANCE WHICH FULLY AVOIDS DAMAGE ON CUTTERS CAUSED BY AN OVER HEIGHT WORKPIECE.

-          THE REAR PRESSURE PLATE PROVIDES EXTREMELY UNIFORM HOLDING PRESSURE FOR OUTSTANDING ACCURACY OF MACHINING.

6)  ONE YEAR WARRANTY ON DEFECTIVE PARTS

OPTIONAL FEATURES:

1)           FEED MAGAZINE

-          THIS MECHANISM PROVIDES MAXIMUM CONVENIENCE FOR FEEDING STOCK INTO THE MACHINE, KEEPING DOWNTIME TO A MINIMUM AND INCREASING THE RATE OF PRODUCTION.

-          ESPECIALLY HELPFUL WHEN CUTTING SHORT STOCK.

2)           SPINDLE POSITIONING CONTROLLER

3)           TOOL RADIUS DISPLAY METER

4)           SPINDLE SPEED AT 9000RPM

5)           AUXILIARY FEED ROLLER FOR SHORT WORKPIECE

 

Spindle Configuration

 


Webmaster:  Logan Dicks.
Copyright 2001 Moulder Techniques. All rights reserved.
Revised: 06/27/13.